0.01mA Dielectric Voltage Withstand Test Equipment , AC Withstand Voltage Tester
The main parameters:
1, the input characteristics: single-phase 47 ~ 63HZ, 115 / 230V ± 15% (optional), 3A fuse
2, AC voltage test: Rated output: 5KV / 12mA
3, the output frequency: 60 / 50Hz (optional)
4, the output waveform: sine wave distortion <2%, the crest factor of 1.3 to 1.5
5, the upper limit setting: Range: 0.10 ~ 12.00mA, resolution: 0.01mA, accuracy: ± (2% of the set
value +2 words) * 1
6, Lower limit setting: Range: 0 ~ 12.00mA, Resolution: 0.01mA, Accuracy: ± (2% of setting value
+ 2 words) * 1
7, the voltage setting: Resolution: 10V, Accuracy: ± (2% set value +5 V) Voltage regulation: ± (1%
set value +5 V) No load to full load
8, the rise time: Range: 0,1 ~ 999.9s, resolution: 0.1s
9, the test time: Range: 0,0.2 ~ 999.9S, resolution 0.1S, (0 = continuous test)
10, arc detection: can set the sensitivity: 0 ~ 9
11, the voltmeter: Range: 0.00 ~ 6.00KV, resolution: 0.01KV Accuracy: ± (2% of the reading +1
words)
12, ammeter: Range: AC 0.10 ~ 12.00mA, DC 0.02 ~ 5.00mA Accuracy: ± (2% of the reading +1
words) Resolution: 0.01mA
13, programmable logic remote control: Input: Test, Reset Output: Pass, Fail, Test-in-Process,
14, the test results Expression: buzzer, LCD display and reading, remote control status output
15, memory group: 5 groups of test conditions memory, each group has 4 test mode selection
(W, I, W ~ I linked I ~ W linkage)
16, the keyboard security lock: keyboard security lock to prevent misuse of the operator or
program to modify the wrong
17, liquid crystal display: 16X2 dot matrix, anti-white backlight
18, correction: the use of software correction, from the front panel type
19, the use of the environment: Temperature: 0 ~ 40 ℃, relative humidity <80% RH
20, Size: 89mm high x80mm wide x370mm deep
21, Weight: 9kg
Product Tags:
|
|
0.01mA Dielectric Voltage Withstand Test Equipment , AC Withstand Voltage Tester Images
|
